就是那么酷炫,就是那么有钱!什么歌?

就是那么酷炫,就是那么有钱!什么歌?

那也还没上市啊，目前市面上那种的只有我大外星人才可以买到，而且一直处于高端笔记本最前沿，次一点就是地球人和神舟战神系列。我敢说外星人是目前最炫酷的了，配置特别高，人家音响都是宝马车级的，只要LZ有钱就行

the target and contact elements are utilized in the contact areas of the electrode-workpiece and workpiece-workpiece; the ecc and the tcc are also applied to these elements. in the next step,目标和接触元素中使用的电极与工件以及工件与工件接触区；ecc和tcc也适用于这些元素。在下一步，the results from the previous step and temperature distribution are used as thermal loads for thermal-mechanical-coupled fe analysis. the results include a new contact condition and a contact pressure, which are used again as nodal load to update boundary conditions for electro-thermal analysis. the从以前的步骤和温度分布的结果作为热负荷热力耦合有限元分析。结果包括一个新的接触状态和接触压力，这是再次使用作为节点荷载更新的电-热分析的边界条件。的calculations in the loop continue until the welding time is satisfied.在循环计算持续到焊接时间满意。after welding cycle, the holding cycle begins. in this step, the current is turned off, and only the electrode force remains as a mechanical load. for cooling cycle, by using the birth-and-death elements method, the electrode is removed from the surface of the workpiece, and convection still remains as thermal load in the在焊接周期，保持周期开始。在这一步中，目前是关闭的，只有电极压力仍然是一个机械负荷。冷却循环，采用生死单元法，电极从工件表面去除，并对流仍然是热负荷的model. the residual stress distribution is achieved at the end of the cooling step when the temperature decreases to the ambient room temperature.模型。残余应力的分布是在冷却阶段结束时当温度下降到室温。

如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！

点此我要举报以上问答信息