H3C SecPath F100-C配置问题

[H3C]dis cu
#
sysname H3C
#
firewall packet-filter enable
firewall packet-filter default permit
#
insulate
#
firewall statistic system enable
#
radius scheme system
server-type extended
#
domain system
#
local-user admin
password cipher .]@USE=B,53Q=^Q`MAF4<1!!
service-type telnet terminal
level 3
service-type ftp
#
acl number 2000
rule 1 permit source 192.168.2.0 0.0.0.24
#
interface Aux0
async mode flow
#
interface Ethernet0/0
ip address 192.168.0.1 255.255.255.0
#
interface Ethernet0/1
ip address 192.168.2.1 255.255.255.0
#
interface Ethernet0/2
#
interface Ethernet0/3
#
interface Ethernet0/4
ip address 192.168.1.2 255.255.255.0
nat outbound 2000
#
interface Encrypt1/0
#
interface NULL0
#
firewall zone local
set priority 100
#
firewall zone trust
add interface Ethernet0/0
add interface Ethernet0/1
add interface Ethernet0/4
set priority 85
#
firewall zone untrust
set priority 5
#
firewall zone DMZ
set priority 50
#
firewall interzone local trust
#
firewall interzone local untrust
#
firewall interzone local DMZ
#
firewall interzone trust untrust
#
firewall interzone trust DMZ
#
firewall interzone DMZ untrust
#
FTP server enable
#
ip route-static 0.0.0.0 0.0.0.0 192.168.1.1 preference 60
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
#
return
外网地址：192.168.1.2
网关地址：192.168.1.1
子网掩码：255.255.255.0

内网网段为:192.168.2.0
内网网关地址：192.168.2.1
子网掩码：255.255.255.0
防火墙LAN1口为内网接口
LAN4口为外网接口
为什么我按照上面的配置 ，不能上网，与外网不能，这是为什么啊？请高手指教,谢谢!我防火墙是接在路由器下面的。

acl number 2000
rule 1 permit source 192.168.2.0 0.0.0.24
这里错了
acl num 2000
undo rule 1
rule 1 permit source 192.168.2.0 0.0.0.255

如上命令，先删掉你之前配置的rule 1 在创建一个 反掩码为0.0.0.255

我给你一个配置模板吧。 dis cur # sysname secpath_f100-c # firewall packet-filter enable # undo connection-limit enable connection-limit default deny connection-limit default amount upper-limit 50 lower-limit 20 # firewall statistic system enable # radius scheme system server-type extended # domain system # acl number 2000 rule 1 permit source 192.168.1.0 0.0.0.255 rule 10 deny # interface ethernet1/0 mtu 1450 tcp mss 1024 ip address 192.168.1.1 255.255.255.0 # interface ethernet2/0 speed 10 duplex full mtu 1450 tcp mss 1024 ip address 100.1.1.2 255.255.255.0 nat outbound 2000 # interface null0 # firewall zone local set priority 100 # firewall zone trust add interface ethernet1/0 set priority 85 # firewall zone untrust add interface ethernet2/0 set priority 5 # firewall zone dmz set priority 50 # firewall interzone local trust # firewall interzone local untrust # firewall interzone local dmz # firewall interzone trust untrust # firewall interzone trust dmz # firewall interzone dmz untrust # ftp server enable # dhcp server forbidden-ip 192.168.1.1 # ip route-static 0.0.0.0 0.0.0.0 100.1.1.1 preference 60 # user-interface con 0 user-interface vty 0 # return ========= 基本的配置就是这样。 嘿嘿。

如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！

点此我要举报以上问答信息