NAT设置静态转换后无法PING通

R1#debug ip nat
IP NAT debugging is on
R1#ping
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
Packet sent with a source address of 10.0.1.1

*Mar 1 00:36:33.751: NAT: s=10.0.1.1->10.0.0.1, d=10.0.0.2 [30]
*Mar 1 00:36:33.779: NAT*: s=10.0.0.2, d=10.0.0.1->10.0.1.1 [30].
*Mar 1 00:36:35.755: NAT: s=10.0.1.1->10.0.0.1, d=10.0.0.2 [31]
*Mar 1 00:36:35.783: NAT*: s=10.0.0.2, d=10.0.0.1->10.0.1.1 [31].
*Mar 1 00:36:37.758: NAT: s=10.0.1.1->10.0.0.1, d=10.0.0.2 [32]
*Mar 1 00:36:37.786: NAT*: s=10.0.0.2, d=10.0.0.1->10.0.1.1 [32].
*Mar 1 00:36:39.757: NAT: s=10.0.1.1->10.0.0.1, d=10.0.0.2 [33]
*Mar 1 00:36:39.785: NAT*: s=10.0.0.2, d=10.0.0.1->10.0.1.1 [33].
*Mar 1 00:36:41.760: NAT: s=10.0.1.1->10.0.0.1, d=10.0.0.2 [34]
*Mar 1 00:36:41.788: NAT*: s=10.0.0.2, d=10.0.0.1->10.0.1.1 [34].
Success rate is 0 percent (0/5)

interface Ethernet0/0
ip address 10.0.1.1 255.255.255.0
no ip redirects
ip nat inside
half-duplex
!
interface Serial0/0
ip address 10.0.0.1 255.255.255.0
ip nat outside
clock rate 64000
no fair-queue
!

ip nat inside souce static 10.0.1.1 10.0.0.1

显示了地址的转换，却无法PING通，我是用R1的内部端口，去PING R2的外端口的

刚入门，请高手指教

问题补充：

忘了说上R2的情况了
interface Ethernet0/0
ip address 10.0.1.2 255.255.255.0
no ip redirects
ip nat inside
half-duplex
!
interface Serial0/0
ip address 10.0.0.2 255.255.255.0
ip nat outside
clock rate 64000
no fair-queue
!

是的

1.这是不可能的 2.不要被ping到的ip迷惑，因为所有路由器默认给它所属客户端分配的地址都是192.168.*.*；意思是说你从外网ping到的只是ip号与你机器相同的另一台外网客户端，而并你的私有ip。

如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！

点此我要举报以上问答信息