Office2016专业版更新时提示无法流式传输office错误代码30183-28(404)
答案:6 悬赏:40 手机版
解决时间 2021-11-27 20:02
- 提问者网友：玫瑰园
- 2021-11-27 04:11
Office2016专业版更新时提示无法流式传输office错误代码30183-28(404)
最佳答案
- 五星知识达人网友：过活
- 2021-11-27 05:22
只有加入用户体验计划才会出现更新错误问题，退出该计划就可以正常更新了。
全部回答
- 1楼网友：像个废品
- 2021-11-27 09:40
网页链接
- 2楼网友：执傲
- 2021-11-27 09:19
啊
- 3楼网友：妄饮晩冬酒
- 2021-11-27 08:37
Step1:
1. Now, tap on Start.
2. Enter the command “inetcpl.cpl” and click OK.
3. Click on the “Security” tab. inetcpl security
4. Click “Reset all zones to default level” button at the bottom of the window.
5. Click OK button.
Step2:
1. Press Ctrl+R. A dialogue box will open.
2. In the Dialogue box type “%systemroot%\temp” and Press Enter..
3. Now, click on Yes or OK or Allow or Continue button, if prompted.
4. Now, check if you are in the Temp folder.
5. If you are in the Temp folder, remove all the files in it. There might be some files which you will not be able to delete, which you can skip.
6. Again, press and hold Windows key and the letter ‘R’ at the same time to invoke Run command box.
7. Enter the command “%temp%” without quotes and then press Enter key.
8. Now, click on Yes or OK or Allow or Continue if prompted.
9. Now, check if you are in the Temp folder again.
10. If you are in the Temp folder, delete all the files in it. There might be some files which you will not be able to delete, which you can skip.
In most cases error code Code 30088-28 should be resolved by now, if however the problem still persists please get your system checked by an expert.
1. Now, tap on Start.
2. Enter the command “inetcpl.cpl” and click OK.
3. Click on the “Security” tab. inetcpl security
4. Click “Reset all zones to default level” button at the bottom of the window.
5. Click OK button.
Step2:
1. Press Ctrl+R. A dialogue box will open.
2. In the Dialogue box type “%systemroot%\temp” and Press Enter..
3. Now, click on Yes or OK or Allow or Continue button, if prompted.
4. Now, check if you are in the Temp folder.
5. If you are in the Temp folder, remove all the files in it. There might be some files which you will not be able to delete, which you can skip.
6. Again, press and hold Windows key and the letter ‘R’ at the same time to invoke Run command box.
7. Enter the command “%temp%” without quotes and then press Enter key.
8. Now, click on Yes or OK or Allow or Continue if prompted.
9. Now, check if you are in the Temp folder again.
10. If you are in the Temp folder, delete all the files in it. There might be some files which you will not be able to delete, which you can skip.
In most cases error code Code 30088-28 should be resolved by now, if however the problem still persists please get your system checked by an expert.
- 4楼网友：人類模型
- 2021-11-27 07:35
我也是这样。。。
- 5楼网友：你哪知我潦倒为你
- 2021-11-27 06:09
翻 * 墙试试，神奇的锅嘉
我要举报
如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！
点此我要举报以上问答信息
大家都在看
推荐资讯