TEA1507各脚功能
答案:2 悬赏:70 手机版
解决时间 2021-01-31 03:24
- 提问者网友：黑米和小志
- 2021-01-30 13:04
TEA1507各脚功能和3842的各脚功能
最佳答案
- 五星知识达人网友：十鸦
- 2021-01-30 13:38
TEA1507各脚功能；
1 VCC supply voltage
2 GND ground
3 CTRL control input
4 DEM input from auxiliary winding for demagnetization timing, OVP and OPP
5 Isense programmable current sense input
6 DRIVER gate driver output
7 HVS high voltage safety spacer, not connected
8 DRAIN drain of external MOS switch, input for start-up current and valley sensing
UC3842各脚功能；
1 COMP This pin is the Error Amplifier output and is made available for loop compensation.
2 VFB This is the inverting input of the Error Amplifier. It is normally connected to the switching power supply output through a resistor divider.
3 ISENSE A voltage proportional to inductor current is connected to this input. The PWM uses this information to terminate the output switch conduction.
4 RT/CT The oscillator frequency and maximum Output duty cycle are programmed by connecting resistor RT to Vref and cpacitor CT to ground. Operation to 500kHz is possible.
5 GROUND This pin is the combined control circuitry and power ground.
6 OUTPUT This output directly drives the gate of a power MOSFET. Peak currents up to 1A are sourced and sunk by this pin.
7 VCC This pin is the positive supply of the control IC.
8 Vref This is the reference output. It provides charging current for capacitor CT through resistor RT.
1 VCC supply voltage
2 GND ground
3 CTRL control input
4 DEM input from auxiliary winding for demagnetization timing, OVP and OPP
5 Isense programmable current sense input
6 DRIVER gate driver output
7 HVS high voltage safety spacer, not connected
8 DRAIN drain of external MOS switch, input for start-up current and valley sensing
UC3842各脚功能；
1 COMP This pin is the Error Amplifier output and is made available for loop compensation.
2 VFB This is the inverting input of the Error Amplifier. It is normally connected to the switching power supply output through a resistor divider.
3 ISENSE A voltage proportional to inductor current is connected to this input. The PWM uses this information to terminate the output switch conduction.
4 RT/CT The oscillator frequency and maximum Output duty cycle are programmed by connecting resistor RT to Vref and cpacitor CT to ground. Operation to 500kHz is possible.
5 GROUND This pin is the combined control circuitry and power ground.
6 OUTPUT This output directly drives the gate of a power MOSFET. Peak currents up to 1A are sourced and sunk by this pin.
7 VCC This pin is the positive supply of the control IC.
8 Vref This is the reference output. It provides charging current for capacitor CT through resistor RT.
全部回答
- 1楼网友：末日狂欢
- 2021-01-30 14:46
LJH473
我要举报
如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！
点此我要举报以上问答信息
大家都在看
推荐资讯