H3C如何调限速
答案:2 悬赏:0 手机版
解决时间 2021-03-25 04:10
- 提问者网友：王者佥
- 2021-03-24 03:15
H3C如何调限速
最佳答案
- 五星知识达人网友：怀裏藏嬌
- 2021-03-24 04:50
line-rate
speed
qos
traffic-limit
主要这四种
H3C华为交换机端口限速
二层较为准确（如：lr,speed),三层不准确（如：traffic-linit,qos car)
lr :
E050：(可信度100%)
[Quidway-Ethernet0/1]line-rate ?
INTEGER<1-100> Target rate(Mbps
S5500：(可信度100%)
[S5500-GigabitEthernet1/0/1]qos lr outbound cir ?
INTEGER<64-1000000> Committed Information Rate(kbps), it must be a multiple of 64
speed : (可信度100%)
[S5500-GigabitEthernet1/0/1]speed ?
10 Specify speed of current port 10Mb/s
100 Specify speed of current port 100Mb/s
1000 Specify speed of current port 1000Mb/s
auto Enable port's speed negotiation automatically
traffic-limit : (可信度50%,当设定50M时，带宽为7M左右；当设定10M时，带宽为1M左右)
[Quidway E050-Ethernet0/1]traffic-limit inbound ip-group 2000 ?
INTEGER<1-100> Target rate(Mbps)
link-group Apply the link-based acl
rule Specify the ID of acl rule
qos car :(s5500)(可信度50%,当设定9.6M时，带宽为5M左右)
acl number 2000
rule 0 permit source 10.0.0.0 0.0.0.255
traffic classifier liukong operator and
if-match acl 2000
traffic behavior liukong
car cir 9600 cbs 200000 ebs 4000 green pass red discard yellow pass
qos policy liukong
classifier liukong behavior liukong
interface GigabitEthernet1/0/1
qos apply policy liukong inbound
以上是例子，你可以对照着弄
speed
qos
traffic-limit
主要这四种
H3C华为交换机端口限速
二层较为准确（如：lr,speed),三层不准确（如：traffic-linit,qos car)
lr :
E050：(可信度100%)
[Quidway-Ethernet0/1]line-rate ?
INTEGER<1-100> Target rate(Mbps
S5500：(可信度100%)
[S5500-GigabitEthernet1/0/1]qos lr outbound cir ?
INTEGER<64-1000000> Committed Information Rate(kbps), it must be a multiple of 64
speed : (可信度100%)
[S5500-GigabitEthernet1/0/1]speed ?
10 Specify speed of current port 10Mb/s
100 Specify speed of current port 100Mb/s
1000 Specify speed of current port 1000Mb/s
auto Enable port's speed negotiation automatically
traffic-limit : (可信度50%,当设定50M时，带宽为7M左右；当设定10M时，带宽为1M左右)
[Quidway E050-Ethernet0/1]traffic-limit inbound ip-group 2000 ?
INTEGER<1-100> Target rate(Mbps)
link-group Apply the link-based acl
rule Specify the ID of acl rule
qos car :(s5500)(可信度50%,当设定9.6M时，带宽为5M左右)
acl number 2000
rule 0 permit source 10.0.0.0 0.0.0.255
traffic classifier liukong operator and
if-match acl 2000
traffic behavior liukong
car cir 9600 cbs 200000 ebs 4000 green pass red discard yellow pass
qos policy liukong
classifier liukong behavior liukong
interface GigabitEthernet1/0/1
qos apply policy liukong inbound
以上是例子，你可以对照着弄
全部回答
- 1楼网友：忘川信使
- 2021-03-24 05:08
根你使用的型号有关，命令也不一样。你用什么型号的？
我要举报
如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！
点此我要举报以上问答信息
大家都在看
推荐资讯