开机蓝屏0x00000024

启动电脑就先出现个系统没有启动成功 还有一些选项（正常启动、安全启动、最后一次正确配置 等）可不管选哪个 都会出现一个蓝屏 上面有些英文（看不懂） 最后一排写着

STOP:0x00000024（0x00190203，0x8234D980，0xC0000102，0x00000000）

注意 是一体机的电脑 还有windows都不能启动 就不要说什么运行什么文件的解决方法了

电脑太老了吧？现在XP都很少蓝屏，
首先把系统重新装，排除软件问题，然后把显卡，内存之类的东西拔下，用橡皮擦下接触部分，或用酒精洗洗接触点，再可以去BIOS看看设置，例如内存频率阿，等等相关设置，BIOS引起的蓝屏我都遇到过。
最后可以通过换换别人的配件看看个个排除。

参考资料：www.678zz.com

1、如果电脑不老，而且内存也充足的话，有可能是内存条松了或者是有灰尘，拔出来用毛刷刷干净再插紧进去。也有可能是其他一些未知程序占用了太多内存，按Ctrl+Alt+Del可以查看。

2、电脑出了严重问题的话都是自己重装的，现在一些重装系统的光碟都做的很简单，很容易就能学会如何重装。

3、0x0000000A

主要是由问题的驱动程序、有缺陷或不兼容的硬件与软件造成的.

解决方案:试用下面的办法案尝试排除：
1、新硬件
检查新硬件是否插牢,如果确认没有问题, 将其拔下, 然后换个插槽试试, 并安装最新的驱动程序. 同时还应对照微软网站的硬件兼容类别检查一下硬件是否与系统兼容.
2.新驱动和新服务
如果刚安装完某个硬件的新驱动, 或安装了某个软件, 而它又在系统服务中添加了相应项目(比如:杀毒软件、CPU降温软件、防火墙软件等), 在重启或使用中出现了蓝屏故障, 请到安全模式来卸载或禁用。
3、蓝屏以后，只能重启，如果还能进入系统，进系统后，用EVEREST（优化大师也可以）检测你的显卡型号，然后到驱到之家（www.mydrivers.com)搜索，下载相应的不同版本的显卡驱动程序（最新的不一定就适合，一个不行版本不行，就换一个）进行安装。
如果蓝屏以后系统都进不了，重启的适合，按F8，选择最后一次正确配置启动，一般就可以启动了。
4、最好检查一下散热风扇有没有问题，还有在刚才第三点用优化大师测试一下温度，也有可能是CPU上的硅胶用完了，导致无法正常散热，在电脑城就有的买的。

就知道这么多了，希望能帮到你。。。

Stop 0x00000024 or NTFS_FILE_SYSTEM The Stop 0x24 message indicates that a problem occurred within Ntfs.sys, the driver file that allows the system to read and write to NTFS file system drives. A similar Stop message, 0x23, exists for the file allocation table (FAT16 or FAT32) file systems. Possible Resolutions: # Malfunctioning SCSI and Advanced Technology Attachment (ATA) hardware or drivers can also adversely affect the system's ability to read and write to disk, causing errors. If using SCSI hard disks, check for cabling and termination problems between the SCSI controller and the disks. Periodically check Event Viewer for error messages related to SCSI or FASTFAT in the System log or Autochk in the Application log.

# Verify that the tools you use to continually monitor your system, such as virus scanners, backup programs, or disk defragmenters are compatible with Windows XP. Some disks and adapters come packaged with diagnostic software that you can use to run hardware tests. To test hard disk or volume integrity Method 1: 1. In the Run dialog box, in the Open box type: cmd 2. Start the Chkdsk tool, which detects and attempts to resolve file system structural corruption. At the command prompt type: chkdsk drive: /f Method 2: 1. Double-click My Computer, and then select the hard disk you want to check. 2. On the File menu, click Properties. 3. Click the Tools tab. 4. In the Error-checking box, click Check Now. 5. In Check disk options, select the Scan for and attempt recovery of bad sectors check box. You can also select the Automatically fix file system errors check box. If the volume you are checking is in use, a message asks whether you want to delay disk error checking until the next time you restart your computer. After you restart, disk error checking runs and the volume chosen is not available to run other tasks during this process. If you cannot restart the computer due to the error, use safe mode or Recovery Console. If you are not using the NTFS file system, and the system partition is formatted with the file allocation table (FAT16 or FAT32) file system, long file name (LFN) information can be lost if hard disk tools are started from an MS-DOS command prompt. A command prompt appears when using a startup floppy disk or when using the command prompt startup option on multiple boot systems that use FAT16 or FAT32 partitions with Microsoft Windows 95 OEM Service Release 2 (OSR2), Microsoft Windows 98, or Microsoft Windows Millennium Edition (Me) installed. Do not use tools meant for other operating systems on Windows XP partitions! # Nonpaged pool memory might be depleted, which can cause the system to stop. You can resolve this situation by adding more RAM, which increases the quantity of nonpaged pool memory available to the kernel.

系统缺少文件ntfs,dll文件，建议你重做系统。

拿个相机把蓝屏信息贴上来看看吧，动不动就叫人重装那是菜鸟的办法