XRD标准图谱分析

PDF#09-0413: QM=Star(+); d=(Unknown); I=Diffractometer
Mayenite, syn
Ca12 Al14 O33 (Colorless)
Radiation=CuKa1 Lambda=1.54056 Filter=Ni
Calibration= d-Cutoff= I/Ic(RIR)=
Ref= Natl. Bur. Stand. (U.S.), Circ. 539, 9 20 (1960)

Cubic - Powder Diffraction, I-43d (220) Z=2 mp=
Cell=11.982 Pearson=cI118 (?)
Density(c)=2.676 Density(m)=3.16A Mwt=1386.68 Vol=1720.24 F(30)=50.9(.0159,37)
Ref= Ibid.

Strong Line: 2.68/X 4.89/X 2.45/5 3.00/5 2.19/4 1.95/3 1.66/3 1.60/3 3.20/3 2.56/2
NOTE: Sample prepared by Portland Cement Association Fellowship at NBS, Gaithersburg, Maryland, USA.
Spectrographic analysis showed the following impurities: 0.1-1.0% each of Na, Si, Sr; 0.01-0.1% Fe, Mg; 0.001-0.01% each of Cu, Mn, Mo.
Pattern taken at 25 C.
See ICSD 6287 (PDF 01-070-2144); See ICSD 62040 (PDF 01-078-0910).

d(A) I(f) I(v) h k l n^2 2-Theta Theta 1/(2d) 2pi/d
4.890 95.0 52.0 2 1 1 6 18.126 9.063 0.1022 1.2849
4.240 6.0 4.0 2 2 0 8 20.934 10.467 0.1179 1.4819
3.790 16.0 11.0 3 1 0 10 23.453 11.726 0.1319 1.6578
3.204 25.0 21.0 3 2 1 14 27.822 13.911 0.1561 1.9610
2.998 45.0 40.0 4 0 0 16 29.776 14.888 0.1668 2.0958
2.680 100.0 100.0 4 2 0 20 33.407 16.703 0.1866 2.3445
2.556 18.0 19.0 3 3 2 22 35.079 17.539 0.1956 2.4582
2.447 50.0 55.0 4 2 2 24 36.696 18.348 0.2043 2.5677
2.350 10.0 11.0 5 1 0 26 38.268 19.134 0.2128 2.6737
2.189 40.0 49.0 5 2 1 30 41.206 20.603 0.2284 2.8703
2.054 10.0 13.0 5 3 0 34 44.050 22.025 0.2434 3.0590
1.945 30.0 41.0 6 1 1 38 46.661 23.330 0.2571 3.2304

跪求高手指出上面每个数据意思，另外我最想要的就是使衍射角和衍射强度两个数据，请问那两组是的？

I(f)是强度，2-Theta是衍射角。

这是一张pdf卡片，矿相是水泥（c12a7） d(a)(晶面间距) i(f)（衍射峰强度） i(v) （积分强度） h k l（晶面指数） n^2 （晶面指数平方和） 2-theta（2θ角） theta（θ角） 1/(2d) 2pi/d

如以上回答内容为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！

点此我要举报以上问答信息